Tool specifications
Model number
Stock number
Head angle
Collet size
Horsepower
Free speed
Average air consumption
Air inlet
Air hose inside diameter
Required air pressure
Vibration value
1
Noise level
Speed setting
Grip
Overall Length
Housing material
Net weight
Shipping weight
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.
6
JAT-403 Angled Die Grinder
JAT-403
505403
90 deg.
1/4 in.
0.3
22,000 RPM
3 CFM
1/4 in. NPT
3/8 in.
90 psi (621 kPa)
2
1.24 m/s
99 dB(A)
variable
Inline
6-1/8 in. (155.58 mm)
Aluminum
1.32 lb. (0.60 kg)
1.52 lb. (0.69 kg)