Table of Contents
Advertisement
Tool specifications
Model number
Stock number
Collet size
Horsepower
Free speed
Average air consumption
Air inlet
Air hose inside diameter
Required air pressure
Vibration value
1
Noise level
Speed setting
Grip
Hose included
Overall Length
Housing material
Net weight
Shipping weight
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.
6
JAT-400 Micro Die Grinder
JAT-400
505400
1/8 in.
0.1
54,000 RPM
1.4 CFM
1/4 in. NPT
1/4 in.
90 psi (621 kPa)
2
0.6 m/s
76 dB(A)
variable
Pencil style shaft
5-ft. with strain relief sleeve
5-1/2 in. (139.7 mm)
Aluminum
0.54 lb. (0.24 kg)
0.78 lb. (0.35 kg)
Advertisement
Table of Contents
