Spe Cial Key Se Quences; Lock Out; 1St Use De Fault; Fac Tory De Fault - Telex RadioCom BTR-800-H1 Operating Instructions Manual

TR-800 Menu Struc ture

Spe cial Key Se quences

Lock out

•
Press [UP]+[DOWN] for 3 sec onds to lock or un lock the
beltpack. The words "Loc on" will be dis played when the
fea ture is ac ti vated, "Loc oFF" will be dis played when the
beltpack is un locked. Pressing [MENU] will still func tion
to view screens, but [SET] will no lon ger start any ed it -
ing. ClearScan™, First use, Fac tory de fault and Fea ture
en able/dis able are no lon ger ac ces si ble.
st
1 Use De fault
•
Press [MENU] while turn ing on the beltpack to en ter the
st
1 use de fault setup screen. This places the unit on group
01A with chan nel 01 flash ing. Any user-programmed
fre quen cies that had been en tered pre vi ously are re -
tained. The beltpacks must now be set to dif fer ent trans -
mit chan nels us ing the [UP]/[DOWN] but tons. Then
[SET] is hit to place the units on those chan nels. If lock -
out had been ac ti vated, the beltpack co mes up where it
was last left re gard less of [MENU] be ing pressed on
power-up.

Fac tory De fault

•
Pressing all four but tons
at the same time for three sec onds places the unit on
group 01A with chan nel 01 flash ing, just like beltpack 1
use de fault, ex cept the all user-programmed fre quen cies
that had been en tered pre vi ously are erased. Af ter the
but tons are re leased, it still may take sev eral sec onds for
the beltpack to re set. The beltpacks must now be set to
dif fer ent trans mit chan nels us ing the [UP]/[DOWN] but -
tons. Then [SET] is hit to place the units on those chan -
nels. If lock out had been ac ti vated, the beltpack co mes up
where it was last left re gard less of these four keys be ing
pressed.
[
MENU]+[SET]+[UP]+[DOWN]
st
7-21