Telex TR-825 Owner & User Manual

Telex Model TR-825 Beltpack
Owners/Users Manual (Preliminary Information).
General Description:
The Telex Model TR-825 Beltpack Transmitter/Receiver(s) is a component
of the BTR-800 Wireless Intercom System. The TR-825 is intended for use
as a belt worn wireless mobile intercom radio for use in a professional installation such
as television or cinema production.
Each BTR-800 base station can be used with one to four TR-825 units per base station.
The TR-825 operates within the 470 to 608 and 614 to 746 MHz range. (TV Channels
14-36 and 38-59).
The TR-825 transmitter operates on a single frequency within the above range and the
receivers operate on two frequencies contained within an 18 MHz wide section of the
above frequency range.
Typical transmitter conducted output Power is 50 mW. The TR-825 transmit power is
automatically reduced when the unit is close-in to the base station to aid in
intermodulation reduction and unnecessary transmit power.
Operating frequencies can be selected from pre-set groups or the user can
select special operating frequencies within 18 MHz wide allotments.
The talk buttons on the top panel can be switch selected to operate in the
Push-to-Talk mode or the Push-to-Transmit mode.
The microphone gain control, along with the LCD Display, talk function
switch and frequency/group controls are located on the back panel.
The ON/OFF/Volume Controls, Talk Buttons, Low Battery,
Modulation Indicator and the Talk Light are located on the top panel.
Wireless Talk Around and Stage Announce buttons with their indicators are also on the
top panel.
Transmit and Receive antennas are attached to the TR-825. Either or both antennas can
be unscrewed for field replacement but are not coaxial connectors.
The TR-825 beltpack can be powered by AA Alkaline or a Nickel-Metal Hydride Battery
pack.