USB media player
Function description
The USB media player displays still pictures and
motion pictures saved in a USB memory by inserting
the USB memory device into the USB terminal at the
bottom of the display unit.
Note
●
To use this function, set [USB media player] to
[Enable] in [Setup] - [USB media player settings]. (see
page 86)
Single Media Player
Files are played by a single unit.
USB memory
Note
●
This unit does not support Multi Media Player.
●
Pictures in the USB memory cannot be displayed
via a daisy chain connection with the DVI-D IN/OUT
terminal.
Preparation
■
Supported device
●
Commercially available USB memory devices are
supported. (Those with security functions are not
supported. Operation is not guaranteed.)
●
USB memory devices other than those formatted in
FAT16 or FAT32 cannot be used.
●
Up to 32 GB of USB memory in size are supported.
●
Only single partition configuration is supported.
■
Preparation
Prepare the following files in the USB memory for the
media player.
●
Play file
●
Scenario (as necessary)
●
File list (as necessary)
■
Play file
The unit's Media Player supports the formats below.
File name (Extension)
Still image
JPG, JPEG, JPE
AVI, MKV, ASF, WMV, TS, MTS,
Moving image
MP4, 3GP, MOV, FLV, F4V
Codec
Moving image
Codec
MPEG4VISUAL
MPEG4AVC
VC-1 Advanced
VC-1 Simple & Main
Audio
Sampling frequency
Codec
(kHz)
8/11.025/12/16/22.05
MP3
/24/32/44.1/48
8/11.025/12/16/22.05
AAC
/24/32/44.1/48
WMA Standard
8/11.025/12/16/22.05
WMA 9
/24/32/44.1/48
WMA 10 Pro
Still image
Codec
JPEG
Maximum resolution
480@30fps
1080@30fps, High Profile
1080@30fps
1080@30fps
Bit rate
(kbps)
8-320
1-1728
1-1728
Maximum resolution
4096×4096
English
105