Copying The Usb Memory Data To The Display - Panasonic TH-49AF1U Operating Instructions Manual

6
Select [YES] with
<ENTER>.
Data copy to the USB memory starts.
Data to USB Memory
The data will be overwritten when any data exists originally.
Are you OK to write the data?
YES
The following message is displayed after data copy
has finished.
Data copy finished.
7
After data copy has finished, remove
the USB memory device from the USB
terminal.
Copying the USB memory data to the
display
1
Insert the USB memory device with
copied data to the USB terminal on
the bottom of the display of data copy
destination (same as the step 1 on
page 109).
After the [Select Copy Type] screen is displayed, go
to the step 5.
Note
●
If the USB memory containing the data for cloning
is connected in power-on state, the [Select Copy
Type] message in step 5 is displayed.
2
Display [Setup] menu pressing
<SETUP>.
3
Select [OSD language] with
press <ENTER> for over 3 seconds.
The following display appears.
Options
Display software information
Software licenses
USB data cloning
Shipping
OpenPort PLATFORM Shutdown
4
Select [USB data cloning] with
and press <ENTER>.
5
Select [USB Memory → Display] with
and press <ENTER>.
Select Copy Type
Display → USB Memory
USB Memory → Display
110
English
and press
NO
and
6
Select [YES] with
<ENTER>.
Data copy to the display starts.
Data from USB Memory
Do you copy the data?
YES
The following message is displayed after data copy
has finished.
Cloning finished.
Please turn off the power.
7
After data copy has finished, remove
the USB memory device from the USB
terminal.
8
Press the <Main Power On / Off
button> to turn the power OFF, and
turn the power ON again.
The copied content is applied to the display.
●
If the <Main Power On / Off button> is locked,
please disconnect the AC cord plug from the wall
outlet.
●
When USB memory is not removed in the step
7, the message [Select Copy Type] is displayed
when the display is turned on again.
Note
● If the data is copied with [POWER button lock] set to
[On], this function operates after turning the power
off, and the <Main Power On / Off button> cannot be
used to turn the power on. In this case, remove the
power plug, wait sufficient time, and then connect the
power plug again to turn the power on.
●
[POWER button lock] function is only for TH- 55AF1U,
TH-49AF1U and TH-42AF1U.
and press
NO