Shipping Condition - Panasonic TH-49AF1U Operating Instructions Manual

Shipping condition

You can reset the settings / the adjusted values of the
following menus to the factory settings:
[Picture], [Sound], [Setup], [Position], [Options]
At the same time, resets the settings and the data of
OpenPort PLATFORM to the factory settings and also
deletes the applications you have installed.
■
Remote control
1
Press <SETUP> to display the [Setup]
menu.
2
Select [OSD language] with
and press <ENTER> for more than 3
seconds.
The following screen will be displayed.
Options
Display software information
Software licenses
USB data cloning
Shipping
OpenPort PLATFORM Shutdown
3
Select [Shipping] with
<ENTER>.
Note
●
The display may be greyed out in some
conditions, such as when the OpenPort
PLATFORM system is starting up. In this case,
the <ENTER> operation is disabled.
Shipping
YES
4
Select [YES] with
<ENTER>.
The message [Shipping ( Wait a moment )] will be
displayed.
5
After the message [Please turn off
the power] is displayed, turn the
power off pressing <Main Power On /
Off button>.
●
If the <Main Power On / Off button> is locked,
please disconnect the AC cord plug from the wall
outlet.
and press
NO
and press
■
Unit
1
Press <MENU (Unit)> for several
times and display the [Setup] menu.
2
Select [OSD language] with
then press and hold <ENTER (Unit)>
for more than 5 seconds.
Note
●
The display may be greyed out in some
conditions, such as when the OpenPort
PLATFORM system is starting up. In this case,
the <ENTER (Unit)> operation is disabled.
3
Select [YES] with <- (Unit)> or
<+ (Unit)> and press <ENTER (Unit)>.
The message [Shipping ( Wait a moment )] will be
displayed.
4
After the message [Please turn off
the power] is displayed, turn the
power off pressing <Main Power On /
Off button>.
●
If the <Main Power On / Off button> is locked,
please disconnect the AC cord plug from the wall
outlet.
, and
115
English