Panasonic TH-49AF1U Operating Instructions Manual page 91

Note
●
The inputs set to [(Skip)] in [Input label] (see page
82) are skipped when searching.
●
When Y/G/VIDEO terminal is used as VIDEO
input, set [COMPONENT]* to [(Skip)].
: [COMPONENT] may be displayed as [RGB]
*
depending on the settings of [Component/RGB-in
select]. (see page 78)
[Custom]:
Repeatedly searches [Current input], [1st search
input] and [2nd search input] in order, and switches
to an input with a signal.
PC
Searching...
[Searching...] is displayed during the input search.
[1st search input], [2nd search input]
Set the input to search when [Custom] is selected.
[HDMI1] / [HDMI2] / [DVI-D] / [PC] /
[COMPONENT]* / [VIDEO] / [USB] / (None)
: [COMPONENT] may be displayed as [RGB]
*
depending on the settings of [Component/RGB-in
select]. (see page 78)
Note
●
With the USB input, the unit determines no signal
is present when the USB memory is not connected
to the USB terminal.
●
This menu will be greyed out and cannot be set
under the following conditions.
[Input lock] is not set to [Off]. (see page 95)
•
[Failover/Failback] - [Input change mode] is not
•
set to [Off]. (see page 91)
●
If the input is changed by this function, the last
input is selected when the power is turned on next
time.
If you wish to retain the original input when the
power is turned on, set [Initial input] to the original
input. (see page 94)
Failover/Failback
Automatically switches to the backup input video if an
interruption of video occurs.
1
Select the item with
Select the set point with
[Input change mode]
[Off]:
Disables the Backup Input function.
■
●
●
●
.
●
.
[Primary backup input]
Failover/Failback
Input change mode
[Quick]:
Promptly switches to the backup input if an
interruption of video occurs.
The backup video signal needs to be in the same
format as the (main) input in use for viewing.
Upon switching to the backup input, the video and
audio adjustment values for the (main) input used
for viewing will be inherited.
Failover/Failback
Input change mode
Primary backup input
Secondary backup input
Auto switch back mode
Changing mode
Backup input change
Main input
Current input
[Normal]:
Switches to the backup input if an interruption of
video occurs.
The backup video signal does not need to be in the
same format as the (main) input in use for viewing.
Upon switching to the backup input, the video and
audio adjustment values for the backup input will
be used.
[Input change mode]: [Quick]
Promptly switches to the backup input if an
interruption of video occurs, and enables switching
between digital (HDMI1 / HDMI2 / DVI-D) inputs.
Note
The backup video signal needs to be in the same
format as the (main) input in use for viewing.
Upon switching to the backup input, the video and
audio adjustment values for the (main) input used for
viewing will be inherited.
When switching from [Main input (except for
OpenPort PLATFORM)] to [Backup Input OpenPort
PLATFORM], the following functions take over
operation as main input.
[No activity power off], main unit button operation
This function will start operating once a video signal is
detected by both the input in use for viewing and the
backup input and the [Backup input change] item is
displayed as [Active].
Sets the first priority backup input.
(None) / [OpenPort PLATFORM] / [HDMI1] /
[HDMI2] / [DVI-D]
The input that is of the same type as the one in use
for viewing will be greyed out.
Off
Quick
HDMI1
DVI-D
Disable
High speed
Active
HDMI2
Main input
English
91