Connecting To The Ethernet Interface; Connecting To The Ieee 1394 Interface - Gestetner DSm415 Network Manual

Connecting the Network Cable to the Network
Connecting to the Ethernet
Interface
The network interface board supports
10BASE-T or 100BASE-TX connec-
tions.
A A A A
2
Turn off the main power switch.
Important
❒ Make sure the main power is
off. See "Turning On the Pow-
er", General Settings Guide.
B B B B
Connect the Ethernet interface ca-
ble to the 10BASE-T/100BASE-TX
port.
C C C C
Turn on the main power switch.
1.
Indicator (green)
Remains green when the machine is
properly connected to the network.
2.
Indicator (yellow)
Turns yellow when 100 BASE-TX is
operating. Turns off when 10 BASE-T
is operating.
14
Connecting to the IEEE 1394
Interface
Important
❒ Before making the connection,
touch the metallic part to ground
yourself.
Note
❒ Use the interface cable supplied
with the IEEE 1394 interface board
(optional).
❒ Make sure the interface cable is not
looped.
A A A A
Connect the IEEE 1394 interface
cable to the IEEE 1394 ports.
ZHZH020J
Note
❒ Two interface ports are availa-
ble for connecting the IEEE 1394
interface cable, either is suita-
ble.
ZHZH030J