Leds - Waters Network Systems GS1008 Operating Manual

of Media Access Control (MAC) and PHY, and layer 2 protocols such as 802.1d, 802.1q, and
LACP.
5.0

LEDs

The following table provides the status and description of the LEDs:
LED
POWER
LINK/ACT
10/100/1000Mbps
If there is a no link status, the possible causes are as follows:
The attached device is not powered on.
The cable may not be the correct type or is faulty.
The installed building premise cable is faulty.
The port may be faulty.
Waters Network Systems
Color
Green Lit when +5V DC power is on and good
10/100/1000Ethernet TP Port 1 to 8 LED
Lit when connection with remote device is good
Green
Blinks when any traffic is present
Lit green when 1000Mbps speed is active
Green/
Lit amber when 100Mbps speed is active
Amber
Off when 10Mbps speed is active
User's Manual
GS-1008/GS-1008-TX
Function
Table 5.1
Page 6