Interrupt Copy - Gestetner CS555 Copy Reference Manual

Copying
Important
❒ When Basic Authentication, Win-
dows Authentication, or LDAP
Authentication is set, always log
off when you have finished using
the machine to prevent unautho-
rized users from using the ma-
2
chine.
- How to operate -
- -
❖ ❖ ❖ ❖ To stop the machine during a multi-
copy run
Press the { { { { Clear/Stop} } } } key.
❖ ❖ ❖ ❖ To return the machine to the initial
condition after copying
Press the { { { { Clear Modes} } } } key.
❖ ❖ ❖ ❖ When clearing entered values
Press the { { { { Clear/Stop} } } } key or [Clear]
on the display.
❖ ❖ ❖ ❖ To check the settings
Press the { { { { Check Modes} } } } key.

Interrupt Copy

Use this function to interrupt a long
copy job to make urgently needed
copies.
A A A A
Press the { { { { Interrupt} } } } key.
The Interrupt indicator lights.
When scanning is interrupted
A Remove the originals that were
being copied, and then place
the originals you want to copy.
20
B Press the { { { { Start} } } } key.
Copying starts.
C When copying is complete, re-
move the originals and copies.
D Press the { { { { Interrupt} } } } key again.
The Interrupt indicator turns
off.
E When the display prompts you
to do so, place the former set of
originals again.
F Press the { { { { Start} } } } key.
Note
❒ The previous copy job's set-
tings are restored and the
machine continues copying
from where it left off.
When the machine continues
copying
A Place the originals you want to
copy.
B Press the { { { { Start} } } } key.
The machine stops the previous
job and starts copying the new
originals.
C When copying is complete, re-
move originals and copies.
D Press the { { { { Interrupt} } } } key again.
The Interrupt indicator goes
out.
The previous copy job's settings
are restored and the machine
continues copying from where
it left off.
AFU170S