Table of Contents
Advertisement
❖ ❖ ❖ ❖ Stamp Position
You can set the position at which
the stamp is printed.
Note
❒ Default: Top Right
❖ ❖ ❖ ❖ Stamp Setting
You can have the text printed on
the first page or all pages.
Note
❒ Default: All Pages
❖ ❖ ❖ ❖ Size
You can select the size of the stamp
printed in Stamp Text mode.
Note
❒ Default: Auto
❖ ❖ ❖ ❖ Superimpose
You can have page numbers print-
ed as a negative where they over-
lap black parts of the image.
Note
❒ Default: No
❖ ❖ ❖ ❖ Stamp Color
You can set the selected priority
color when printing the text.
Note
❒ Default: Black
Settings You Can Change with User Tools
Input / Output P.
❖ ❖ ❖ ❖ Switch to Batch (SADF)
You can select to have the Batch or
SADF function displayed when
you press [Special Original]. See p.15
"Batch".
Note
❒ Default: Batch
❖ ❖ ❖ ❖ SADF Auto Reset
In SADF mode, an original must be
set within a specific time after the
previous original has been fed.
You can adjust this time from 3 sec-
onds to 99 in 1 second increments.
Note
❒ Default: 5 seconds
❖ ❖ ❖ ❖ Rotate Sort: Auto Paper Continue
You can continue copying when
paper of the required orientation
has run out during rotate-sorting.
See p.43 "Rotate Sort".
Note
❒ If you select [No] :
• When paper of the required
orientation runs out, the ma-
chine stops copying and
prompts you to supply copy
paper. When you load paper,
the machine will continue
copying.
❒ If you select [Yes] :
• Copying continues using copy
paper of a different orienta-
tion. The copy job will finish
even if the machine is left un-
attended.
❒ Default: No
1
/
2
153
6
Advertisement
Table of Contents
