Gestetner CS555 Copy Reference Manual page 138

❖ ❖ ❖ ❖ Connect Copy
Message
Cannot connect to
the sub-machine.
Check the status
of the sub-ma-
chine.
Cannot print from
the sub-machine.
Check the status
of the sub-ma-
chine.
Sub-machine is in
Interrupt mode.
Sub-machine does
not have the same
paper setting(s).
The Cover Sheet
setting(s) of the
sub-machine is
different from the
main machine.
The Slip Sheet
setting(s) of the
sub-machine is
different from the
main machine.
The Designation
Sheet setting(s)
of the sub-machine
is different from
the main machine.
Causes
The L L L L indicator is lit.
The hard disk of the sub-
machine is malfunctioning.
A paper misfeed has oc-
curred on the sub-machine,
or toner or other supplies
need to be replenished.
The User Tools menu of the
sub-machine is open.
The sub-machine is in In-
terrupt mode.
Paper type or tray settings
on the two machines do not
match.
Cover settings on the two
machines do not match.
Slip Sheet settings on the
two machines do not
match.
Designation Sheet settings
on the two machines do not
match.
If Your Machine Does Not Operate As You Want
Solutions
Press [Exit] on the main machine and
follow the instructions on the dis-
play.
Follow the instructions displayed.
Reference
"Adding Toner", General Settings
Guide
"Clearing Misfeeds", General
Settings Guide
"Loading Paper", General Set-
tings Guide
If the sub-machine's display indi-
cates that a cover is open, follow the
instructions shown.
Press the { { { { User Tools/Counter} } } } key to
close the User Tools menu.
Press the { { { { Interrupt} } } } key on the sub-
machine to exit Interrupt mode. See
⇒ p.20 "Interrupt Copy".
Make the same settings on both ma-
chines.
5
125