User Tools (Copier / Document Server Features)
❖ ❖ ❖ ❖ Auto Sort
You can specify whether the Sort
function is to be selected when the
machine is turned on, or when the
functions are cleared.
Note
❒ Default: No
❖ ❖ ❖ ❖ Memory Full Auto Scan Restart
If memory becomes full while
scanning originals, the machine
will copy the scanned originals
first, and then automatically pro-
ceed scanning remaining originals.
You can enable or disable this
function.
Note
❒ If you select [No] :
• When memory becomes full,
6
the machine stops operation,
allowing you to remove the
copies on the output tray.
❒ If you select [Yes] :
• You can leave the machine
unattended to make copies,
but sorted pages will not be
sequential.
❒ Default: No
❖ ❖ ❖ ❖ Select Stapling Position (Top Left)
Specify which the type of stapling
to be shown on the top left key of
the initial display.
Note
❒ Default: Top
❒ The optional finisher is required
to use this function.
154
❖ ❖ ❖ ❖ Select Stapling Position (Bottom Left)
Specify which the type of stapling
to be shown on the bottom left key
of the initial display.
Note
❒ Default:
• Finisher 3000B (100-sheet sta-
ples): Top Slant
• Finisher MEC (50-sheet sta-
ples): Top Slant
• Finisher MEC BK (saddle
stitch): Center
❒ The optional finisher is required
to use this function.
❖ ❖ ❖ ❖ Select Stapling Position (Top Right)
Specify which the type of stapling
to be shown on the bottom right
key of the initial display.
Note
❒ Default: Top 2
❒ The optional finisher is required
to use this function.
❖ ❖ ❖ ❖ Select Stapling Position (Bottom Right)
Specify which the type of stapling
to be shown on the bottom right
key of the initial display.