Gestetner CS555 Copy Reference Manual page 39

Copying
A A A A
Open the bypass tray.
2
B B B B
Insert the paper with the side you
want to copy facing up until you
hear the beep, and align the paper
guide to the paper size.
1.
Extender
Important
❒ If the guides are not flush against
the copy paper, image skewing
or misfeeds might occur.
Note
❒ Do not stack paper over the lim-
it mark, otherwise image skew-
ing or misfeeds might occur.
❒ Swing out the extender to sup-
port paper sizes larger than
A4L, 8
❒ Fan paper to avoid multi-sheet
feeds.
26
" × 11"L.
1
/
2
C C C C
Select the paper type and size.
When copying onto standard size
paper
A Press the { { { { #} } } } key.
The "Bypass Tray Paper" screen
is displayed.
B Press [Select Size].
C Select the paper size.
ADB038S
D Press [OK] twice.
When copying onto custom size
paper
A Press the { { { { #} } } } key.
B Press [Custom Size].
C Enter the vertical size of the pa-
per using the number keys,
and then press [#].
ADB076S
D Enter the horizontal size of the
paper using the number keys,
and then press [#].
Note
❒ If [Horiz.] is not highlighted,
press [Horiz.].
❒ To register the custom size
entered, press [Program], and
then press [Exit].
E Press [OK].