Emerson M200-01200024A10101AB100 Quick Start Manual page 4

Control Techniques Ltd
The Gro
Newtown
Powys
UK
SY16 3BE
This declaration applies to the Unidrive-M product range comprising model numbers listed below:
Model
Interpretation
No.
X Application
aa(a) Control System 100, 101, 200, 201, 300, 400, 600, 700, 701, 702
bb Frame Size
c Voltage Rating
ddddd Current Rating
e Configuration
The model number may be followed by additional characters that do not affect the ratings.
The variable speed drive products listed above have been designed and manufactured in accordance with the
following European harmonized standards:
Adjustable speed electrical power drive systems - Part 5-1: Safety requirements -
EN 61800-5-1:2007
Electrical, thermal and energy
Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific
EN 61800-3: 2004
test methods
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for
EN 61000-6-2:2005
industrial environments
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for
EN 61000-6-4:2007
industrial environments
Electromagnetic compatibility (EMC) - Part 3-2: Limits for harmonic current emissions
EN 61000-3-2:2006
(equipment input current ≤16 A per phase)
Electromagnetic compatibility (EMC) - Part 3-3: Limitation of voltage changes, voltage
EN 61000-3-3:2008 fluctuations and flicker in public, low voltage supply systems, for equipment with rated
current ≤16 A per phase and not subject to conditional connection
EN 61000-3-2: 2006 Applicable where input current < 16 A. No limits apply for professional equipment where input
power ≥1 kW.
These products comply with the Restriction of Hazardous Substances Directive - RoHS 2011/65/EU, the Low
Voltage Directive - LVD 2006/95/EC and the Electromagnetic Compatibility Directive - EMC 2004/108/EC.
These electronic drive products are intended to be used with appropriate motors, controllers, electrical
protection components and other equipment to form complete end products or systems. Compliance with
safety and EMC regulations depends upon installing and configuring drives correctly, including using the
specified input filters. The drives must be installed only by professional installers who are familiar with
requirements for safety and EMC. The assembler is responsible for ensuring that the end product or
system complies with all the relevant laws in the country where it is to be used. Refer to the User Guide. An
EMC data sheet is also available giving detailed EMC information.
4
Declaration of Conformity
Format: Xaaa-bbc ddddde
M = Manufacturing Automation, E = Elevator, F = Flow,
H = HVAC, CSD = Compressor
01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11
1 = 100 V, 2 = 200 V, 4 = 400 V, 5 = 575 V, 6 = 690 V
Example 01000 = 100 A
A = AC in AC out (with internal choke), D = DC in AC out (Inverter), C = AC in DC out
(Rectifier), E = AC in AC out (without internal choke), T = AC in AC out with Dual
Rectifier
G. Williams
Vice President, Technology
Date: 30th July 2015
Place: Newtown, Powys, UK
Moteurs Leroy-Somer
Usine des Agriers
Boulevard Marcellin Leroy
CS10015
16915 Angoulême Cedex 9
France
Unidrive M200-201 Quick Start Guide
Format: Xaa-bbc ddddde
HS = High Speed
70, 71, 72
Issue Number: 6