Table of Contents
Advertisement
ON indicator:
icon will display when you push ON the "On-Off" button (red light "R"). If the "1-4 cups" is
The
pressed, the
icon will be shown together.
Detail function key and operation method
Setting the time
•
"H" and "min" buttons are used to set Time of Day;
•
Default Time of Day is 0:00
•
To set the hour, press the "H" button once, HOUR will increase from the initial 0:00 at one-hour intervals.
Pressing and Holding the "H" button for more than 2 seconds will make the HOUR advance at a
rate of about 3-5 hours per second.
To set minute, press the "min" button once, MINUTE will increase from the initial 0 at one-minute
intervals. Pressing and Holding the "min" button for more than 2 seconds will make the MINUTE
advance at a rate of about 3-5 minutes per second.
Brewing the coffee:
•
To activate the brewing cycle manually: The "On/Off" button is pressed, LCD shows the current time
of day. The
icon indicated on the LCD: red light "R" will become activated, and brewing cycle starts.
•
To deactivate the brewing cycle manually: The "On/Off" button is pressed, the
red light will be deactivated and the heater will turn off, and brewing process will stop.
Program-on Function:
•
Default "Program-set" time is 12:00.
•
Press the "Auto-On" button, the LCD displays the current time of day. The
on the LCD and Program-on function (green light "R") will become activated. Brewing cycle will
start automatically at programmed time. At programmed time, the
icon indicated on the LCD (red light "R" becomes activated).
•
To disable the "Program-on" function: Press the "Auto-On" button and
green light "R" will be deactivated.
Setting the Program-On Time procedures:
•
Press the "Prog. Set" button once then LCD starts flashing with the Program-on time and the coffee
maker enters in Program-on time setting mode (Prog Set mode).
•
To set hour, press the "H" button once, HOUR will increase from the initial 12:00 at one-hour intervals.
Pressing and Holding the "H" button for more than 2 seconds will make the HOUR advance at a
rate of about 3-5 hours per second. To set minute, press the "min" button once, MINUTE will
increase from the initial 0 at one-minute intervals. Pressing and Holding the "min" button for more
than 2 seconds will make the MINUTE advance at a rate of about 3-5 minutes per second.
•
To exit "Set Program Time" Mode :
- Press the "Prog. Set" button to leave the program setting mode;
- Do nothing. If neither the "H" nor "min" button is pressed for a period of 5 seconds, the "Set
Program Time" mode will be exited and the programmed setting will be in effect (green light "R"
will become activated).
1-4 cups Function:
The "1-4 cups" function adjusts the speed of water flow to improve the flavour of a smaller
•
quantity of brewed coffee.
Activate/deactivate the "1-4 cups" feature by pressing the "1-4 cups" button at any mode.
•
icon will become activated.
Keep warm (glass jug version)
•
"H" and "min" buttons are used to set keep warm time.
•
Default time is 2:00.
•
Maximum time is 2 hours.
•
To set hour, press the "H" button once, HOUR will increase from the initial 0:00 at one-hour
10
logo shut off: the
icon will be indicated
icon shuts off and the
icon will shut off and the
Advertisement
Table of Contents
