Sanyo PLC-WXU700 Owner's Manual page 30

NO SHOW button
Press the NO SHOW button on the remote control to black out
the image. To restore to normal, press the NO SHOW button
again or press any other button. When a projected image is
captured and set as User in the Logo selection (see page 50),
the screen changes each time you press the NO SHOW button
as follows.
black out → the captured image → normal →
P-TIMER button
Press the P-TIMER button on the remote control. The P-Timer
display 00:00 appears on the screen and the countdown starts
(00:00–59:59).
To stop the countdown, press the P-TIMER button. To cancel
the P-Timer function, press the P-TIMER button again.
IMAGE button
Press the IMAGE button on the remote control to select a
desired image mode of the screen. See pages 36, 43 for
details.
SCREEN button
Select the screen size (See pages 38-39, 46 for details).
No show disappears after 4 seconds.
• • • • •
P-Timer display

Basic Operation
NO SHOW button
P-TIMER button
IMAGE button
SCREEN button
Note:
See the previous page for the description of
other buttons.
9