Table of Contents
Advertisement
S8JX
Mounting
15-/35-/50-/100-/150-W Models
The following three mounting methods are possible.
. Front-mounting: Refer to Mounting Bracket Provided with Front-mounting Power Supplies
. Bottom-mounting
. Side-mounting
Note: Additional mounting methods are also available using DIN Rail-mounting models.
Standard Mounting
15-/35-/50-/100-/150-W Models
Front-mounting
*
Note: 1. Improper mounting will interfere with heat dissipation and may occasionally result in deterioration or damage of internal parts. Use the
standard mounting method only.
2. When mounting the Power Supply, mounting it to a metal plate (*) is recommended.
3. Install the Power Supply so that the air flow circulates around the Power Supply, as the Power Supply is designed to radiate heat by
means of natural air flow.
300-W 5V, 12V Model
Front-mounting
DIN Rail mounting
300-W 24V, 48V Model
Front-mounting
DIN Rail mounting
18
DIN Rail-mounting
Bottom-mounting
Bottom-mounting
20mm min.
20mm min.
Note: 1. Improper mounting will interfere with heat dissipation and may occasionally result in deterioration or
damage of internal parts. Use the standard mounting method only.
2. When mounting the Power Supply, mounting it to a metal plate (*) is recommended.
3. Do not cover the air holes (provided at fan mounted side and the opposite side) to have enough air-
cooling.
Bottom-mounting
20mm min.
20mm min.
Note: 1. Improper mounting will interfere with heat dissipation and may occasionally result in deterioration or
damage of internal parts. Use the standard mounting method only.
2. When mounting the Power Supply, mounting it to a metal plate (*) is recommended.
3. Install the Power Supply so that the air flow circulates around the Power Supply, as the Power Supply
is designed to radiate heat by means of natural air flow.
Vertical Side-mounting
*
*
20mm min.
20mm min.
20mm min.
20mm min.
on page 26.
B
Horizontal Side-mounting
Side-mounting
Side-mounting
C
*
ë
Advertisement
Table of Contents
