Table of Contents
Advertisement
Specifications
• When using [Top Slant], [Left 2] or [Top 2] with Combine, Double copies or
Auto Reduce/Enlarge function, "
entation.
nals and paper you placed. In this case, change the paper orientation.
• When [Left 2] or [Top 2] is selected, the following settings are useful to rotate
images appropriately:
• Auto Reduce/Enlarge or Auto Paper Select
• With image rotation in Auto Tray Switching of User Tools
• If you select Saddle Stitch function with the booklet finisher, the machine
staples and folds the paper in the centre, then delivers the paper folded.
• If you select Saddle Stitch function in Magazine mode, the machine staples
the paper, and folds it like a book, then delivers the paper folded.
❖ ❖ ❖ ❖ Punch
• When using Punch and Combine, Double Copies, or Auto Reduce/En-
large, the message "
may appear because of the orientation of the original and the copy paper.
If this occurs, change the orientation of the copy paper.
• Since punch holes are made in each copy, the punch hole positions vary
6
slightly.
• Punchable paper sizes are as follows:
2 tray finisher
Punch kit type
2 & 4 holes type
4 holes type
2 & 3 holes type
Booklet finisher
Punch kit type
2 holes type
4 holes type
• The punch hole positions change according to the orientation of the paper
selected.
134
"message may appear depending on the orientation of origi-
Blank part will appear. Check orientation.
2 holes
4 holes
4 holes
2 holes
3 holes
2 holes
4 holes
Blank part will appear. Check ori-
A3-B5 JIS, 11" × 17"
L
1
K
A4-A5, 8
/
2
A3, B4 JIS, 11" × 17"
L
K
A4, B5 JIS, 8
A3-B5 JIS, 11" × 17"
L
1
K
A4-A5, 8
/
2
A3-B5 JIS, 11" × 17"
L
1
K
A4-A5, 8
/
2
A3, B4 JIS, 11" × 17"
L
K
A4, B5 JIS, 8
A3, A4, B4 JIS, B5 JIS, 11" × 17", 8
L
× 14", 8
" × 11"
1
/
2
K
A4, B5 JIS, 8
L
A3
K
A4
" × 11"
" × 11"
1
/
2
" × 11"
" × 11"
" × 11"
1
/
2
1
/
2
" × 11"
1
/
2
"
"
Advertisement
Table of Contents
