Removing The Secondary System Memory (Ram) - Clevo P177SM Service Manual

Disassembly

Removing the Secondary System Memory (RAM)

Figure 12
RAM Module
Memory Upgrade Process
Removal
1. Turn off the computer, and turn it over, remove the battery
a. Remove the top
2. Remove the top cover module
cover module.
3. Remove screws
b. Remove the screws.
4. Carefully lift the keyboard
c. Carefully lift the key-
board up, being
a.
careful not to bend
the keyboard ribbon
cable.
b.

A. Top Cover Module
B. Keyboard
• 5 Screws
2 - 16 Removing the Secondary System Memory (RAM)
(Figure 12a
A
- (Figure 12a ) .
1 5
up, being careful not to bend the keyboard ribbon cable
B
A
4
3
1 2
A
(page 2 - 5), and component bay cover
)
.
c.
5
(page 2 - 14).
(Figure 12c ) .
6
B
6