Table of Contents
Advertisement
5 Setting Camera Parameters
HDCVI technology allows you to set parameters for the camera and to control the camera from a
Dahua HDCVI DVR.
1. Connect the camera to a Dahua HDCVI DVR.
2. From the DVR, select the Main Menu and choose Setting. Then, select the System tab and select
the PTZ link, on the left-side menu.
3. Select the appropriate channel number for the camera.
4. Set CONTROL MODE as HDCVI and set PROTOCOL as HD-CVI.
5. Click Save to store the changes.
6. Click the Camera tab at the top of the page.
7. Select the ENCODE link on the left-side menu.
8. Click Save to store the changes.
9. Click the right-mouse button and select PTZ Control. The HDCVI DVR opens the PTZ Setup
menu.
Figure 5-1
Figure 5-2
10
Advertisement
Table of Contents
