Summary of Contents for Dahua Technology IPC-HDB3202-DI Series
Page 1
In-ceiling HD (IR) Vandal Proof Network Dome Camera User’s Manual Version 1.5.0...
Page 2
Welcome Thank you for purchasing our network camera! This user’s manual is designed to be a reference tool for your system. Please read the following safeguard and warnings carefully before you use this series product! Please keep this user’s manual well for future reference!
Page 3
Important Safeguards and Warnings 1.Electrical safety All installation and operation here should conform to your local electrical safety codes. The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited power source is rated 12V DC or 24V AC in the IEC60950-1. (Refer to general introduction) Please note: Do not connect two power supplying sources to the device at the same time;...
Page 4
Do not touch the CCD (CMOS) optic component. You can use the blower to clean the dust on the lens surface. Always use the dry soft cloth to clean the device. If there is too much dust, please use the water to dilute the mild detergent first and then use it to clean the device.
Table of Contents General Introduction ...................... 1 Overview ......................1 Features ......................1 Specifications ....................2 1.3.1 Performance ....................2 Structure ........................14 Dimensions ..................... 14 Port Description....................14 Bidirectional talk ....................17 2.3.1 Device-end to PC-end................17 2.3.2 PC-end to the Device-end ................. 17 Alarm Setup ....................
Page 6
Operation ......................26 Web Operation ......................28 Network Connection ..................28 Login and Main Interface ................. 28 FAQ ..........................30 Appendix Toxic or Hazardous Materials or Elements ............31...
1 General Introduction 1.1 Overview This series network camera integrates the traditional camera and network video technology. It adopts audio and video data collection, transmission together. It can connect to the network directly without any auxiliary device. This series network camera uses standard H.264 and MJPEG video compression technology and G.711a audio compression technology, which maximally guarantee the audio and video quality.
time; it may result in device damage! Log function Support PAL/NTSC Support system resource information and running status real-time display. Day/Night mode auto switch (electromagnetic ICR switch). Assistant Built-in IR light. Support IR night vision (For IPC-HDBW Series only). Function ...
Page 9
0@25fps) 0@25fps) extra extra stream(704*576 stream(704*576 @25fps) @25fps) NTSC: NTSC: Main Main stream(1280*96 stream(1280*96 0@30fps) 0@15fps) extra extra stream(704×480 stream(704×480 @30fps) @15fps) Main Main stream(1280*72 stream(1280*72 0@30fps) 0@30fps) extra extra stream(704×480 stream(704×480 @30fps) @30fps) H.264: 56Kbps- H.264: 56Kbps- 8192 kbps. It is 6144 kbps.
Page 10
Local Storage Support Micro SD card storage Wire Network 1-channel wire Ethernet port, 10/100 Base-T Ethernet Network HTTP,TCP,ARP,RTSP,RTP,UDP,RTCP,SMTP,FTP,DHCP,DNS,DDNS,PP Protocol POE,IPv4/v6,SNMP,QoS,UPnP,NTP. Remote Monitor, system setup, log information, maintenance, upgrade and etc Operation Video Output 1-channel analog video output,BNC port Reset Built-in RESET button IR distance 10 to IR distance 20 IR distance 10 to...
Page 11
Video H264/H.264H/H.264B/MJPEG Compression Note: Some versions do not support H.264H. Standard PAL: Main stream(2048*1536@15fps) extra stream(704*576@15fps) Main stream(1920*1080@25fps) extra stream(704*576@25fps) Video Frame Rate NTSC: Main stream(2048*1536@15fps) extra stream(704×480@15fps) Main stream(1920*1080@30fps) extra stream(704×480@30fps) H.264: 56Kbps-8192Kbps adjustable Video Bit Rate MJPEG: adjustable and bit rate is adjustable. Support customized setup.
Page 12
IR light IR distance 10 to 20 meters (For IR series product only) Power Support AC24V/DC12V/PoE (Port for AC 24V is inside.) Power General series: below 7W. Consumption IR series: below 8W. Working -20℃~+60℃ Temperature Working ≤95% Humidify Dimensions(m ¢146×139.5 Weight 1.25kg Installation...
Page 13
NTSC: NTSC: NTSC: Main Main Main stream(1920*1080@3 stream(1280*960@30 stream(1920*1080@3 0fps) fps) 0fps) extra extra stream extra stream stream(704*480@30f (704*480@30fps) (704*480@30fps) extra stream extra stream (1280*720@1fps) (1280*720@1fps) Note: Extra stream 2’s actual frame rate depends on device max capacity set which can be adjusted within its range. H.264: 16kbps- 8192kbps adjustable...
Page 14
Video Output 1-channel analog video output,BNC port Reset Built-in RESET button IR light IR distance 20 to 30 meters (For IPC-HDBW series product only) Power Support AC 24V/DC12V/PoE (Port for AC 24V is inside.) General series: below Power General series: below 5W. Consumption IR series: below 7W.
Page 15
Main stream(2048*1536@20fps) extra stream(704×480@20fps), Main stream(1920*1080@30fps) extra stream(704×480@30fps) H.264: 16Kbps-16Mbps adjustable Video Bit Rate MJPEG: adjustable and bit rate is adjustable. Support customized setup. Support mirror. Video Flip Support flip function. Snapshot Max 1f/s snapshot. File extension name is JPEG. Privacy Mask Supports max 4 privacy mask zones Video Setup...
Page 16
Installation Support multiple installation modes Model IPC-HDB/HDBW5502-DI Parameter Main High performance DSP Processor Embedded LINUX System Support real-time network, local record, and remote operation at the same Resources time. User Interface Remote operation interface such as WEB, DSS, PSS System Status Micro SD card status, bit stream statistics, log, and software version.
Page 17
Audio Input 1-channe RCA audio input Audio Output 1-channel RCA audio output Bidirectional Reuse the first audio input channel Talk Input Audio Bit Rate 8kbps 16bit or 16kbps 16bit Audio Compression G.711a/G.711Mu Standard 396 (18*22) detection zones; sensitivity level ranges from 0 to 100; area threshold ranges from 0 to 100.
Page 18
Image Sensor 1/3-inch CMOS Pixel 2048(H)×1536(V) Day/Night Support day/night mode switch and electromagnetic IR-CUT at the same Mode time. Auto Iris DC drive Gain Control Manual/Auto White Balance Manual/Auto On/Off Manual/Auto Electronic It ranges from 1/3 to 1/30000. Shutter NTSC: It ranges from 1/4 to 1/30000. Motorized Not support Support remote motorized focus...
Page 19
Privacy Mask Supports max 4 privacy mask zones Video Setup Support parameter setup such as brightness, contrast. Video Channel title, time title, motion detect, privacy mask. Information Lens 2.7mm~12mm@F1.2 3mm~9mm@F1.2 Lens Interface ¢14. Lens is the default accessories. Audio Input 1-channe RCA LINE IN (extra wiring needed) Audio Output 1-channel RCA LINE OUT (extra wiring needed)
2 Structure 2.1 Dimensions You can refer to the following figures for dimension information. The Unit is mm. See Figure 2-1 and Figure 2-2. Figure 2-1 Dimension 1 Figure 2-2 Dimension 2 2.2 Port Description For the non-IR series product, the interface is shown as in Figure 2-3, Figure 2-4, Figure 2-5 and Figure 2-6.
Page 21
Figure 2-3 Port 1 Figure 2-4 Port 2 Figure 2-5 Port 3...
Page 22
Figure 2-6 Cable Please refer to the following sheet for external connection port definition information. Port Port Name Connector Function Description AC 24V power POWER Connect to AC 24V power. port DC 12V power POWER Connect to DC 12V power. port RJ45 network...
Alarm input port. It is to receive the on-off ALARM_IN signal from the external alarm source. Ground end. Input audio signal. It is to receive the analog AUDIO_IN audio signal from the devices such as pickup. Output audio signal to devices such as AUDIO_OUT sound box.
Page 24
Figure 2-7 Please refer to the following figure for alarm input information. See Figure 2-8. Alarm input: When the input signal is idle or grounded, the device can collect the different statuses of the alarm input port. When the input signal is connected to the 5V or is idle, the device collects the logic “1”. When the input signal is grounded, the device collects the logic “0”.
3 Installation Important Before you complete the installation and setup, do not remove the electrostatic attraction film on the transparent enclosure. Otherwise it may result in injury. After remove electrostatic attraction film, do not touch dome enclosure in case it may leave stain.
Page 27
Step 2 Pull signal cable and power line from hole on ceiling, and set all wiring of the device. If there is unused portion, put them back into the hole. Note: Connect device to ground (GND) to improve its reliable. ...
Page 28
Figure 3-3 Installation 2 b) Lens horizontal rotation angle setup. Please refer to Figure 3-4 to unfasten the lock screw A and adjust the horizontal monitor angle to the proper position. Then fix the lock screw A. The horizontal angle ranges from 0° ~+350° . c) Lens vertical rotation angle.
Lock screw B/C Adjust lens vertical rotation angle. Lock screw D Adjust lend horizontal rotation angle. Lock Screw A Adjust lend horizontal rotation angle. Figure 3-4 Installation 3 Important Please note Figure 3-4 is based on non-IR series camera. For IR series product, the lock screw position and the lens angle adjustment are the same.
When you are securing the adjusting screw F, you can see the video may become blur. Please push the adjusting screw E to adjust the video slightly. Please secure the adjust screw E if you get a clear video. Adjusting Screw E Adjusting Screw F Figure 3-5 Installation 4 3.2.3 Cable Connection...
Before you go to the Step 2 in the chapter 3.2.1 installation steps, please pull through cable with the waterproof airproof plug to the device enclosure via the installation hole. Step 3 Refer to Step 4 in the chapter 3.2.1 installation steps to install and connect the cable pin to the device and then follow the proper steps to go on the installation.
4 Quick Configuration Tool 4.1 Overview Quick configuration tool can search current IP address, modify IP address. At the same time, you can use it to upgrade the device. Please note the tool only applies to the IP addresses in the same segment. 4.2 Operation Double click the “ConfigTools.exe”...
Page 33
In the configuration tool search interface (Figure 4-1), please select a device IP address and then double click it to open the login interface. Or you can select an IP address and then click the Login button to go to the login interface. See Figure 4-3. In Figure 4-3, you can view device IP address, user name, password and port.
5 Web Operation This series network camera products support the Web access and management via PC. Web includes several modules: Monitor channel preview, system configuration, alarm and etc. 5.1 Network Connection Please follow the steps listed below for network connection. ...
Page 35
Figure 5- 2 Web login After you successfully logged in, please install WEB plug-in unit. Please refer to the Web Operation Manual included in the resource CD for detailed operation instruction. See Figure 5- 3. Figure 5- 3 Web monitoring window...
6 FAQ I can not boot up Please click RESET button for at least five seconds to restore the device. factory default setup. Micro card Do not set the Micro SD card as the storage media to storage the write times schedule record file.
Appendix Toxic or Hazardous Materials or Elements Toxic or Hazardous Materials or Elements Component Name Cr VI PBDE Circuit Board ○ ○ ○ ○ ○ ○ Component ○ ○ ○ ○ ○ ○ Device Case ○ ○ ○ ○ ○ ○...