Removing The Wireless Lan Module - Clevo W970SUW Service Manual

Removing the Wireless LAN Module

1. Turn off the computer, turn it over to remove the battery
2. The Wireless LAN module will be visible at point
3. Carefully disconnect the cables
4. The Wireless LAN module
5
a.
1
b.
4 3 2
(page 2 -
on the mainboard
1
& , and then remove the screw
2 3
(Figure 14c) will pop-up, and you can remove it from the computer.
c.
5
5) and bottom cover (page 2 - 6).
(Figure 14a).
(Figure 14b)
4
5
Removing the Wireless LAN Module 2 - 19
Disassembly
Figure 14
Wireless LAN
Module Removal
a. Locate the WLAN.
b. Disconnect the cable
and remove the screw.
c. The WLAN module will
pop up and lift it out of
the computer.
Note: Make sure you
reconnect the antenna
cable to the "1 + 2"
socket (Figure 14b).

5.Wireless LAN Module
• 1 Screw