Clevo W970SUW Service Manual page 37

6. Carefully (it may be hot) remove the heat sink unit
7. Turn the release latch towards the unlock symbol
H
8. Carefully (it may be hot) lift the CPU
9. Reverse the process to install a new CPU.
10. When re-inserting the CPU, pay careful attention to the pin alignment, it will fit only one way (DO NOT FORCE IT!)
e.
f.
H
off the computer
G 6
to release the CPU
up and out of the socket (Figure
I
g.
G
The heat sink, and CPU area in
general, contains parts which are
H
subject to high temperatures. Allow
the area time to cool before remov-
ing these parts.
)
(Figure 9e .
(Figure 9f).
9g).
I

Caution
Removing and Installing a Processor 2 - 13
Disassembly
Figure 9
Processor Removal
(cont'd)
e. Carefully remove the
heat sink unit.
f. Turn the release latch to
unlock the CPU.
g. Lift the CPU out of the
socket.

G. Heat Sink
I. CPU
• 6 Screws