YOKOGAWA WT332 User Manual page 82

4.1 Setting the Measurement Ranges
Setting the Current Range
CURR
RANGE
1
1. Press
The current range setup menu appears.
The selected current range blinks in display C.
If you previously set the current range to
range that has been automatically selected on the basis of the measured current blinks.
2.
Press
3.
Press
The current range is confirmed, and each of the displays returns to showing measured values.
The figures below show steps 1 to 3 in flowcharts. The User's Manual, IM WT310-01EN, uses these types
of flowcharts to explain procedures.
WT310 Current Ranges
When the Crest Factor Is Set to 3
1.
There are more ranges to choose from on models with the /EX1 or /EX2 option. For details, see section 2.4
in the User's Manual, IM WT310-01EN.
4-2
For information about the other digital numbers and characters that are displayed in the
7-segment LED displays, see section 1.3.
An illustration of the WT310/WT310HC is used in this explanation, but this operation can be
performed using the same keys on the WT332/WT333.
.
or to display the current range that you want to select in display C.
.
3.
(Display C)
2.
Confirm the
setting.
The unit is A.
The unit is mA.
AUTO indicator for the current range
(the AUTO indicator for the current range is lit), the current
When the Crest Factor Is Set to 6
1.
(Display C)
2.
3.
Confirm the
setting.
The unit is A.
The unit is mA.
IM WT310-02EN