EQUINOX FUSION SPOT MAX MKII Contents Safety Instructions Features & Specifications How To Set The Unit Troubleshooting User Manual Order codes: Fixture Cleaning Black housing - EQLED007 White housing - EQLED007A...
Safety Instruction Do not touch any power cables during operation as the high voltage may cause an electric shock. Please read the instructions carefully as they include Warning important information about installation, usage and To prevent or reduce the risk of electrical shock or fire, do not expose WARNING maintenance.
2. Features & Technical Specifications Control: Sound active, Auto, Master/slave and DMX-512 modes Buttons DMX Channels: 1CH/8CH/10CH MENU Selects the programming functions Gobos: 7 Gobos + open DOWN To go backward in the selected functions Colors: 7 Colors + Open To go forward in the selected functions Electronic dimming: 0-100% ENTER...
Page 4
(1 Channel) mode, (8 Channel) mode or (10 Channel) mode. Once the mode has been selected, press the ENTER button to confirm. To SHND go back to the functions without any changes press the MENU button again. Press and hold the MENU button for one second or wait for one minute to go back to the main menu.
Page 5
(sound on) or (sound off) mode. Once the mode has been Display normal mode is for floor standing the unit. selected, press the ENTER button to confirm. To go back to the functions Display inversion mode is for hanging the unit upside down. without any changes press the MENU button again.
Page 6
2-light show Software version In slave mode, Slave 1 means the unit works normally and Slave 2 means 2-light show. In order to create a great light show, you can set Press the MENU button up to when the is blinking on the display. Pressing ENTER button and the display will show the version of software of Slave 2 on the second unit to get contrast movement to each other, even the unit.
4.Troubleshooting Following are a few common problems that may occur during operation and some suggestions for easy troubleshooting: A. The unit does not work, no light and the fan does not work 1. Check the connection of the power and the main fuse. B.