Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Equinox Systems Gigabar MKII COB
Summary of Contents for Equinox Systems Gigabar MKII COB
- Page 1 Gigabar MKII COB System User Manual Order code: EQLED66...
-
Page 2: Safety Advice
NO USER SERVICEABLE PARTS. pulling the power-cable. • This lighting fixture is for professional use only - it is • Make sure that the available mains supply voltage is not designed for or suitable for household use. The between 100~240V AC, 50/60Hz. product must be installed by a qualified technician in accordance with local territory regulations. The safety of • Make sure that the power cable is never crimped or the installation is the responsibility of the installer. The damaged. Check the equipment and the power cable fixture presents risks of severe injury or death due to fire periodically. hazards, electric shock and falls. • If the equipment is dropped or damaged, disconnect the • Warning! Risk Group 2 LED product according to mains power supply immediately and have a qualified EN 62471. Do not view the light output with optical engineer inspect the equipment before operating again. instruments or any device that may concentrate the beam. • WARRANTY: One year from date of purchase. OPERATING DETERMINATIONS If this equipment is operated in any other way, than those described in this manual, the product may suffer damage and the warranty becomes void. Incorrect operation may lead to danger e.g: short-circuit, burns and electric shocks etc. Do not endanger your own safety and the safety of others! Incorrect installation or use can cause serious damage to people and/or property. www.prolight.co.uk Gigabar MKII COB System User Manual... - Page 3 Gigabar MKII COB System Power consumption 130W Power supply 100~240V, 50/60Hz Fuse F3A 250V Dimensions 235 x 990 x 95mm (without stand) Weight 12.5kg Order code EQLED66 30° - Lux FULL ON 4480 1120 1190 2540 95° - Lux FULL ON 30° 95° 990mm 95mm www.prolight.co.uk Gigabar MKII COB System User Manual...
-
Page 4: Technical Specifications
In the box: 1 x fixture & case, 1 x stand, 2 x floor brackets, 01 - Earth point 05 - 3-Pin DMX output 08 - IEC power outputs 1 x foot controller, 02 - LED display 06 - 5-Pin foot 09 - Fuse: F3A 250V 1 x power cable & controller input 03 - Function buttons 10 - 35mm stand adaptor 1 x user manual 07 - IEC power input 04 - 3-Pin DMX input www.prolight.co.uk Gigabar MKII COB System User Manual... -
Page 5: Sound Sensitivity
I s p d S I p Display invert t e S t Auto test h o u r Fixture hours 9 9 9 9 u e r u - - Software version www.prolight.co.uk Gigabar MKII COB System User Manual... - Page 6 158-187 Show 6 248-255 Sound active & strobe 188-217 Show 7 000-007 No function 218-247 Show 8 008-247 16 colour change 248-255 Shows 1-8 248-255 Sound active (shows 1-16) 000-007 No function 3 channel mode: Speed (slow-fast) 008-255 (only when CH6 is values 008-247) Channel Value Function 000-255 Red (0-100%) 000-255 Green (0-100%) 000-255 Blue (0-100%) www.prolight.co.uk Gigabar MKII COB System User Manual...
- Page 7 Par 3 Blue (0-100%) CH10 000-225 Par 4 Red (0-100%) CH11 000-255 Par 4 Green (0-100%) CH12 000-255 Par 4 Blue (0-100%) CH13 000-255 Master dimmer (0-100%) 000-007 No function CH14 008-247 Strobe (slow-fast) 248-255 Sound active & strobe 000-007 No function CH15 008-247 16 colour change 248-255 Sound active (shows 1-16) 000-007 No function CH16 Speed (slow-fast) 008-255 (only when CH15 is values 008-247) www.prolight.co.uk Gigabar MKII COB System User Manual...
-
Page 8: Master/Slave Mode
Sh 0 Sh 8 show you require from . Press the “ENTER” button to confirm the setting. To exit out of any of the above options, press the “MENU” button. Sound active mode: SoUn To access the sound active mode, press the “MENU” button on the front of the unit to show on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to set the sound mode on or off. Press the “ENTER” button to confirm the setting. Sens To adjust the sound sensitivity, press the “MENU” button on the front of the unit to show on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to set the sound sensitivity . Press the “ENTER” button to confirm the setting. Value: 0 - 100 (0 = low sensitivity, 100 = high sensitivity) To exit out of any of the above options, press the “MENU” button. www.prolight.co.uk Gigabar MKII COB System User Manual... - Page 9 Colour selection mode: To set the unit in colour selection mode via the foot controller, press the “MODE” button on the foot CoL- controller to show on the fixtures LED display. Now press the “ENTER” button to select the desired colour. CoL1 CoL4 CoL7 - Red - Yellow - White (RGB) CoL2 CoL5 CoL8 - Green - Magenta - Colour change (speed via sound) CoL3 CoL6 - Blue - Cyan Show mode: To set the unit in show mode via the foot controller, press the “MODE” button on the foot Sh - controller to show on the fixtures LED display. Now press the “ENTER” button to select the desired show (shows 1-8). Blackout: To activate blackout, press the “BLACKOUT” foot switch. Once pressed, the unit will blackout. www.prolight.co.uk Gigabar MKII COB System User Manual...
-
Page 10: Dmx Setup
DATA cable (DMX cable) requirements (for DMX operation): This fixture can be controlled via DMX-512 protocol. The DMX address is set on the back of the unit. Your unit and your DMX controller require a standard 3-pin XLR connector for data input/output, see image below. Further DMX cables can be purchased from all good sound and lighting suppliers or Pro Light Concepts dealers. Please quote: CABL10 – 2m CABL11 – 5m CABL12 – 10m Also remember that DMX cable must be daisy chained and cannot be split. www.prolight.co.uk Gigabar MKII COB System User Manual... -
Page 11: Line Termination
3-pin XLR (socket) Pin 1: GND (screen) Pin 1: GND (screen) Pin 2: Signal (-) Pin 2: Signal (-) Pin 3: Signal (+) Pin 3: Signal (+) Pin 4: N/C Pin 5: N/C www.prolight.co.uk Gigabar MKII COB System User Manual... -
Page 12: Weee Notice
WEEE notice Correct Disposal of this Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. www.prolight.co.uk Gigabar MKII COB System User Manual...