TRENDnet User's Guide
Video Tampering
Set up how the video tampering detection event will be triggered and what actions
will be triggered. When video is suddenly blocked or blacken, tampered, the video
tamper notifications will alert the system manager to check the camera.
Note: This feature is camera dependent.
Camera: Select the camera you want to edit.
Enable
Check this box to enable tamper detection. Click Save
Tamper
to save the settings.
Detection:
© Copyright 2016 TRENDnet. All Rights Reserved.
Draw Area: Click Draw Area button to start drawing. Click and
drag on the area you want to set up the tamper
detection. Click Stop Drawing to stop drawing motion
detection areas. The gray block represents the
detection area.
Sensitivity: Move the slider to adjust detection sensitivity.
Clear All: Click this button to clear all the set up areas.
Arming Schedule
Edit: Click Edit to edit the recording schedule. The Edit
Schedule window will pop up.
1. Select day of the week you want to edit.
2. Select All Day or Customized schedule of the
day.
3. Set the time period and the event you want
to trigger the video recording continuous
(always recording) or motion detection.
TV‐NVR216 / TV‐NVR216D4
98