Table of Contents
Advertisement
TRENDnet User's Guide
Reboot: Click this button to reboot this camera.
Reset: Reset all NVR settings, except the IP network settings
and user information.
Default: Load complete factory default to the camera.
Config File: To load previously saved settings, click Browse to find
the configuration file and then click Import.
Status: Shows the status in loading configuration file.
Export: Click Export to download configuration file. The file will
be downloaded to the Download folder by default.
Firmware: Click Browse to find the latest firmware and then click
Upgrade.
Status: Shows the status in firmware upgrade.
TRENDnet may periodically release firmware upgrades that might add features or
fix problems associated with your TRENDnet model and version. To find out if there
© Copyright 2016 TRENDnet. All Rights Reserved.
Reboot
Import Config. File
Export Config. File
Remote Upgrade
is a firmware upgrade available for your device, please check your TRENDnet model
and version using the link.
http://www.trendnet.com/downloads/
1. If a firmware upgrade is available, download the firmware to your
computer.
Reset
2. Unzip the file to a folder on your computer.
3. Read the firmware upgrade instruction for specific version update
information.
4. Log into the TV‐NVR216.
5. Getting to this Maintenance page to upgrade firmware.
Camera Management
You can modify camera settings here on this page.
TV‐NVR216 / TV‐NVR216D4
88
Advertisement
Table of Contents
