Table of Contents
Advertisement
TRENDnet User's Guide
External file
To playback the video files saved on the USB drive, click and select the External File
playback mode.
Select the USB device to browse the files. Click Refresh to update the list when
necessary.
Click
to view the video and use the playback control to control the playback.
© Copyright 2016 TRENDnet. All Rights Reserved.
Access your NVR with the Web Browser
Default Settings and Factory Reset
To manage your TV‐NVR216 / TV‐NVR216D4 through the web browser, you have to
setup the network connection first. If you didn't set up your NVR attaching to your
home/business network, please enable NVR's DHCP client. Click Apply and then
restart the NVR. If you have already installed your cameras, you have to manually
change their settings. (You don't have to do anything for plug‐and‐Play models
connected directly on PoE ports.) Check the network status when necessary to
make sure the NVR gets the IP address from your network.
Here's the list of your NVR's factory default settings:
System Default
Management IP: 192.168.10.60
Administrator name: admin
Administrator password: admin
Note: If you are not having a brand new TV‐NVR216, you may not know what
password was setup on the NVR. In this case, you have to call our 24‐hour tech
support to get temporary access code to reset the NVR.
TV‐NVR216 / TV‐NVR216D4
70
Advertisement
Table of Contents
