Table of Contents
Advertisement
TRENDnet User's Guide
camera password to the same password of TV‐NVR216 /
TV‐NVR216D4.
When you click this button, all plug‐and‐play TRENDnet
1camera passwords are synchronized.
Refresh: Click refresh to refresh the camera list. Only the cameras
listed with valid camera index number (1 to 4) are
connected to the NVR. Other cameras listed on the table
are cameras on the network, but not connected. You can
double click on the listed camera, more detailed
information will be showed up. The information is
valuable for manual camera settings.
Back: Click on this button or right click on the mouse to go back
to live view.
Net Receive Idle
The TV‐NVR216 / TV‐NVR216D4 can process total 25Mbps
Bandwidth:
video streams. This reference number indicates how
much more network capacity is available now.
© Copyright 2016 TRENDnet. All Rights Reserved.
Plug‐and‐Play installation
This is an effort free installation. Just to make sure all your cameras are set to
factory default and connect the plug‐and‐play cameras to the PoE ports. One for
each port. The NVR will detect the camera and install it automatically. TV‐IP320PI
and TRENDnet 3 cameras are all plug‐and‐play cameras to TV‐NVR216 / TV‐
NVR216D4.
If you changed the channel settings before, click the Edit icon and then select Plug‐
and‐Play on Adding Method and then click OK to save the settings.
TV‐NVR216 / TV‐NVR216D4
23
Advertisement
Table of Contents
