Table of Contents
Advertisement
TRENDnet User's Guide
15. Click Trust (You'll have to do this again when your camera changes to a new IP
address.)
16. The TV‐NVR216 / TV‐NVR216D4 will ask you to change your password from the
default setting. Please enter the new password twice and click OK. The
password must be between 8 and 16 characters. (Alphanumeric: a‐z, A‐Z, 0‐9, !,
@, #, $).
© Copyright 2016 TRENDnet. All Rights Reserved.
17. Enter the user name admin and new password again to start secured session.
18. The Live View page shows up and the video starts to stream.
Note: If you were not go through the basic setup, the camera plug‐and‐play process
will begin after you setup the password. Wait a few minutes and press command‐R
to refresh the browser for the live video.
TV‐NVR216 / TV‐NVR216D4
77
Advertisement
Table of Contents
