TRENDnet User's Guide
Camera Settings Menu
Setting and manage your cameras by bring up the main menu. Click on Camera
Settings Menu
icon.
Camera Connection Settings
Camera installations
The TV‐NVR216 / TV‐NVR216D4 is compatible with TRENDnet PoE cameras, the
compatible cameras can be found on TRENDnet website. There are three major
groups of TRENDnet compatible cameras interacts differently with the TV‐NVR216,
TRENDnet 1, TRENDnet 3, and ONVIF cameras. TRENDnet cameras may fit into one
or more camera groups. Please reference the compatible camera list on page 102
for more details.
IP Camera
Camera No. The camera number is also called channel number. All
© Copyright 2016 TRENDnet. All Rights Reserved.
video recordings and camera settings are using this
sequential number as the major index number.
Status: This column shows the camera connection status.
: The camera is online. You can click on the icon to
show the video and identify which camera you are
setting.
: The camera is not connected to NVR
IP Camera
This is the IP address detected by the NVR or set statically
Address:
to the camera.
Edit: Click this icon to edit the camera connection settings. The
default settings is plug‐and‐play.
Camera Name: This is the camera name. The default name is the camera
model name. You can set it up on your camera directly or
set it up in NVR for compatible cameras.
Protocol: This is the camera product group. You can choose from
TRENDnet 1, TRENDnet 3, ONVIF (generic), or ONVIF
installation with other brand name cameras.
Model Number: This is the model number of the camera. The model
number will be showed up automatically for compatible
cameras.
Management Port: Different camera management protocols has different
management port number. Please see the compatible
camera list for more detail.
PoE Password Set: If you install plug‐and‐play TRENDnet 1 with its factory
default setting, the TV‐NVR216 / TV‐NVR216D4 will set
the camera away from the default and load the TV‐
NVR216 / TV‐NVR216D4 password as camera access
password. If your plug‐and‐play/TRENDnet 1 camera was
manually setup and coming back to plug‐and‐play
installation, you can click the button to synchronize the
TV‐NVR216 / TV‐NVR216D4
22