TRENDnet User's Guide
DST settings
Set up Daylight Saving Time.
Daylight saving time
Auto DST
The daylight saving time adjustment is setting to
adjustment:
automatic adjustment according to the time zone setting
by default. If you want to set the daylight settings
manually, uncheck this box to disable the automatic DST
adjustment.
Enable DST: Manually enable or disable daylight saving time
adjustment.
From / To: Enter the daylight saving time starting and end dates.
Time Zone: Click the selection list to the right of Time Zone.
DST Bias: Choose the amount of time shifting for daylight saving
adjustment.
Click Apply to apply the changes.
© Copyright 2016 TRENDnet. All Rights Reserved.
More settings
More settings
Device Name: This is the name of the NVR. Default: TV‐NVR216
Auto logout: Set up the timeout to logout NVR management after
management inactive for a period of time.
Menu Output
The video output is active for both HDMI and VGA
Mode:
interfaces.
Click Apply to apply the changes.
TV‐NVR216 / TV‐NVR216D4
37