TRENDnet User's Guide
System Management (local)
With the basic system setup, your system is now up and running. Now, you can use
your mouse pointer and monitor to view, set up, and manage your network video
recorder.
Using the Short Menu
Right click your mouse while you are viewing the live video. The short menu will be
popped out.
Short Menu
Common Menu: Click to go to the Configuration section directly
Menu: Click to show the main menu (see page 18 for Main
Menu instructions)
© Copyright 2016 TRENDnet. All Rights Reserved.
Single Screen: Display video live view one at a time. Click on Single
Screen and then choose the camera you want. (The
video you choose will be replaced with other video if
the auto‐switch is on, and the auto‐switch is on by
default.)
Multi‐screen: Display all four video live views at the same time. By
default, the video live view is set in the Multi‐screen
mode. If you are now in Single Screen mode, click on
Multi‐Screen and then choose from 2x2, 3x3, 4x4, 1+5,
1+7 to switch to multi‐screen live view mode.
TV‐NVR216 / TV‐NVR216D4
13