Advertisement
Quick Links
Advertisement
Related Manuals for Gefen MINIDVI-241N
Summary of Contents for Gefen MINIDVI-241N
- Page 1 Mini DVI Switcher U S E R M A N U A L www.gefen.com...
- Page 2 Chatsworth, CA 91311 www.gefen.com support@gefen.com Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. Mini DVI Switcher is a trademark of Gefen Inc. © 2007 Gefen Inc., All Rights Reserved...
-
Page 3: Table Of Contents
Introduction Features Panel Descriptions Connecting and Operating the Mini DVI Switcher RMT2-IR Installation Specifi cations Warranty TABLE OF CONTENTS... -
Page 4: Introduction
Our Commitment Gefen will always offer the fi nest quality product at the best possible price. Included in that price is a lifetime of support from a team of outstanding engineers. How It Works Simply connect your DVI display to the Switcher's display output. -
Page 5: Features
• No loss of quality—the integrity of the signal is preserved throughout the transmissions using high caliber DVI cables that ensure the signal is maintained • Operational fl exibility—you can switch at the source, with the IR remote control or your own universal remote •... -
Page 6: Panel Descriptions
PANEL DESCRIPTIONS Front IR eye Connects to IR Selects port 1 extender or port 2 EQ Trim pots for Indicates if port 1 or Power LED each channel port 2 is selected Indicator Back Connects to 5VDC Connects to DVI Outputs power supply DVI display... -
Page 7: Connecting And Operating The Mini Dvi Switcher
2 Connect the cable from your display (monitor or projector) into the DVI Out of the Mini DVI Switcher. How to Operate the Mini DVI Switcher 1 Use the front panel push button to switch between sources. 2 Alternatively, use the RMT2-IR remote control port to remotely toggle between sources. Operation Notes The Mini DVI Switcher can also be powered from input 1, as long as the device is on and supplying 5v to the DVI connector. -
Page 8: Rmt2-Ir Installation
1. Remove battery cover from the back of the RMT2-IR remote. 2. Verify that dip switches 1 & 2 are in the down (OFF) position. 3. Hold the battery so that you can see the positive side facing up. The side that is not marked must be facing down. -
Page 9: Specifi Cations
SPECIFICATIONS Video Amplifi er Bandwidth ... 1.65 GHz Input Video Signal ... 1.2 volts p-p Input DDC Signal ... 5 volts p-p (TTL) Single Link Range ... 1920 x 1200 DVI Input/Output Connector Type ... DVI-D Power Consumption ... 15 Watts (max.) Power Supply ... -
Page 10: Warranty
If equipment fails because of such defects and Gefen Inc. is notifi ed within two (2) year from the date of shipment, Gefen Inc. will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifi...