Advertisement
Quick Links
Advertisement
Related Manuals for Gefen HDMI-241N
Summary of Contents for Gefen HDMI-241N
- Page 1 HDMI Switcher U S E R M A N U A L www.gefen.com...
- Page 2 Chatsworth, CA 91311 www.gefen.com support@gefen.com Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. HDMI Switcher is a trademark of Gefen Inc. © 2007 Gefen Inc., All Rights Reserved...
-
Page 3: Table Of Contents
Introduction Features Panel Descriptions Connecting and Operating the HDMI Switcher RMT2-IR Installation IR Confl ict Codes IR Extender Installation Specifi cations Warranty TABLE OF CONTENTS... -
Page 4: Introduction
Our Commitment Gefen will always offer the fi nest quality product at the best possible price. Included in that price is a lifetime of support from a team of outstanding engineers. The Gefen HDMI Switcher allows two HDMI devices to be switched easily in to one HDMI compatible monitor or projector. -
Page 5: Features
Features • Switches easily between any two HDMI sources • Maintains 480i, 480p, 720p, 720i, and 1080i, 1080p resolutions • Extends any HDMI compliant device by regenerating the HDMI signal • Maintains high resolution video—beautiful, sharp HDTV resolutions up to 1080P are easily achieved. -
Page 6: Panel Descriptions
PANEL DESCRIPTIONS Connects to IR Indicates if port 1 or Selects port 1 IR eye extender port 2 is selected or port 2 HDMI Out HDMI In 2 Connects to HDMI In 1 5VDC power supply... -
Page 7: Connecting And Operating The Hdmi Switcher
3 Plug the 5VDC power supply into the HDMI Switcher. How to Operate the HDMI Switcher 1 Use the front panel push button to switch between sources. 2 Alternatively, use the RMT2-IR remote control port to remotely toggle between sources. -
Page 8: Rmt2-Ir Installation
1. Remove battery cover from the back of the RMT2-IR remote. 2. Verify that dip switches 1 & 2 are in the down (OFF) position. 3. Insert the battery, hold the battery so that you can see the positive side facing up. The side that is not marked must be facing down. - Page 9 IR CODE CONFLICTS How to Resolve IR Code Confl icts There are matching pairs of dip switches underneath the Switcher unit (outlined below) and under the remote battery cover. Each has two switches which need to be matched for the remote to work. There are 4 possible sets of IR codes and at least one of these sets should be able to resolve any IR confl...
-
Page 10: Ir Extender Installation
1 Plug the IR extender into the Remote port on the front of the Switcher Unit 2 Flip the Dip Switch #1 underneath the unit from the set that is not outlined on the previous page to the ON position In the event of IR confl... -
Page 11: Specifi Cations
SPECIFICATIONS Video Amplifi er Bandwidth ... 1.65 Gbps Input Video Signal ... 1.2 volts p-p Input DDC Signal ... 5 volts p-p (TTL) Single Link Range ... 1920 x 1200 HDMI Input/Output Connector Type ... Type A (19 pin) female Power Consumption ... -
Page 12: Warranty
If equipment fails because of such defects and Gefen Inc. is notifi ed within two (2) year from the date of shipment, Gefen Inc. will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifi...