Table of Contents
Advertisement
Communications Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select Communications
and press the Enter button to enter the Communications menu. Press the arrow keys (pq) to select the
menu option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or
adjust the desired settings and press the Menu button to exit.
Item
LAN
Network
Serial Port Baud Rate
Serial Port Echo
Serial Port Path
Communications
LAN
Network
Serial Port Baud Rate
Serial Port Echo
Serial Port Path
Select
Configure the local area network (LAN) settings.
•
DHCP: Turn the DHCP ON/OFF.
•
IP Address: Assign Network IP Address.
•
Subnet Mask: Assign Network Subnet Mask.
•
Default Gateway: Assign Network Default Gateway.
•
MAC Address: Display the network MAC Address value.
•
Apply: Apply Network settings.
Configure the general network settings.
•
Projector Name: Display the projector hostname for Network.
•
Show Network Messages: Turn network messages on or off.
•
Restart Network: Restart the network.
•
Network Factory Reset: Perform factory reset on the network settings.
The Projector Name and network configuration settings will be reset.
Select the serial port its baud rate.
Control whether the serial port echoes characters.
Select the serial port path from either RS232 or HDBaseT.
43
—
DLP Projector — Owner's Manual
115200
On
RS232
Enter
Exit
Description
—
Advertisement
Table of Contents
