Table of Contents
Advertisement
Item
Digital Vert Shift
Ceiling Mount
Rear Projection
Geometric Correction
PIP-PBP
Source Key
Auto Image
Source Info
Note:
• When 16:9 Aspect Ratio is selected, the resolution of the input signal or 1600x1200 will
automatically be switched to 1600x900.
•
If Auto is selected and input signal is 16:9, screen type will auto become (1920x1200).
•
If Native is selected, the screen will automatically become 1:1 mapping centered.
Move the display area vertically if its size has been changed by the Digital
Zoom setting.
Turn the image upside down for ceiling-mounted projection.
Reverse the image so you can project from behind a translucent screen.
Configure the geometric correction settings. See "Geometric Correction
Menu" on page 34.
Configure the PIP/PBP settings. See "PIP-PBP Settings Menu" on page
35.
List or change the sources.
Force the projector to reacquire and lock to the input signal. This is useful
when signal quality is marginal.
Display the current source settings.
33
—
DLP Projector — Owner's Manual
Description
—
Advertisement
Table of Contents
