9.
After getting into LAN, input the following (Default setting):
•
DHCP: Off
•
IP Address: 192.168.0.100
•
Subnet Mask: 255.255.255.0
•
Default Gateway: 192.168.0.254
10.
Select Apply to confirm the settings, and then wait until finished.
11.
Open a web browser (for example, Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher).
In the Address bar, input the IP address: 10.10.10.10.
12.
Press the Enter / ► button.
The projector is setup for remote management. The LAN/RJ45 function displays as follows.
DLP Projector — Owner's Manual
Main page
47
—
—