Using The Function Button; Switching The Input Signal; Using The Memory Viewer Function - Panasonic PT-VX425N Operating Instructions Manual

Chapter 3 Basic Operations - Basic operations by using the remote control
1) Press the <VOL -> button or <VOL +> button on the remote control.
f This operation can be also performed using the qw buttons on the control panel.
<VOL ->
<VOL +>

Using the FUNCTION button

Some operations in the menu can be assigned to the <FUNCTION> button on the remote control so that it can be used as an
easy shortcut button.
button
1) Press the <FUNCTION> button on the remote control.
To assign functions to the <FUNCTION> button
1) Press the <MENU> button on the control panel or the remote control to display the menu items (main
menu, sub-menu or details menu) you want to assign.
f Refer to "Navigating through the menu" (x page 56) for the operation of the on-screen menu.
2) Press and hold the <FUNCTION> button for 3 seconds or more.
Note
f After settings have been completed, the assigned menu item (main menu, sub-menu or details menu) will be displayed in
[ASSIGNED FUNCTION] of the operation guide under the menu.
f Perform the [PROJECTOR SETUP] menu → [FUNCTION BUTTON] (x page 81) when deallocating functions.

Switching the input signal

You can switch the input signals to project.
1) Press the <COMPUTER 1>, <COMPUTER 2>, <HDMI> or <VIDEO/S-VIDEO> button on the remote
control.
f You can also press the <INPUT SELECT> button on the control panel.
<COMPUTER 1>
<COMPUTER 2>
<HDMI >
<VIDEO/S-VIDEO> Press this button to switch the input signal between VIDEO and S-VIDEO.

Using the MEMORY VIEWER function

It is possible to project the video and pictures which are stored in the USB memory when the USB memory inserted into the
projector.
button
1) Press the <MEMORY VIEWER> button on the remote control.
f Switches the input to MEMORY VIEWER.
50 - ENGLISH
buttons
Decreases the volume.
Increases the volume.
buttons
Switch to COMPUTER1 input.
Switch to COMPUTER2 input.
Switch to HDMI input.