Table of Contents
Advertisement
1)
Press as to select [FILTER COUNTER].
2)
Press the <ENTER> button.
f The [FILTER COUNTER] screen is displayed.
[FILTER
COUNTER]
[TIMER]
[FILTER COUNTER
RESET]
Setting [TIMER]
1)
Press as to select [TIMER].
2)
Press qw to switch the setting of the timer.
f The items will switch each time you press the button.
[OFF] → [1000 H] → [2000 H] → [3000 H] → [4000 H] → [5000 H] → [6000 H] → [7000 H]
[FILTER COUNTER RESET]
1)
Press as to select [FILTER COUNTER RESET].
2)
Press the <ENTER> button.
f The [FILTER COUNTER RESET] screen is displayed.
3)
Press qw to select [OK] and then press the <ENTER> button.
[INITIALIZE ALL]
Return various setting values to their factory default settings.
1)
Press as to select [INITIALIZE ALL].
2)
Press the <ENTER> button.
f The [INITIALIZE ALL] screen is displayed.
3)
When the confirmation is displayed, press qw to select [OK] and then press the <ENTER> button.
f The [NOW INITIALIZING...] screen is displayed and then the [POWER OFF.] screen will be displayed.
4)
Press the <ENTER> button.
f The operation of other buttons is disabled.
f The initial setting (display language) screen will be displayed when turning on the projector next time.
Note
f The projector will enter into the standby status to reflect the setting values when [INITIALIZE ALL] is executed.
f When [INITIALIZE ALL] is executed, [STANDBY MODE], [EMULATE], [FILTER COUNTER] and the setting values of
[NETWORK/USB] cannot be returned to the factory default values. For details about the initialization of [NETWORK/USB],
please refer to [NETWORK/USB] → [INITIALIZE] (x page 96).
84 - ENGLISH
Chapter 4 Settings - [PROJECTOR SETUP] menu
Displays the using time of the filter.
Sets the timer when you want to display an alert message of filter replacement.
Resets the filter counter.
Advertisement
Chapters
Table of Contents
