Serial Terminal - Panasonic PT-VX425N Operating Instructions Manual

Serial terminal

The serial connector which is on the connector panel of the projector conforms to the RS-232C interface specification, so that
the projector can be controlled by a personal computer which is connected to this connector.
Connection
Pin assignments and signal names
D-Sub 9-pin (female)
Outside view
Communication conditions (Factory default)
Signal level
Sync. method
Baud rate
Parity
Character length
Stop bit
X parameter
S parameter
Chapter 7 Appendix - Technical Information
Connecting terminals on projector
D-Sub 9-pin (female)
D-Sub 9-pin (male)
Pin No.
RS-232C-compliant
Asynchronous
9 600 bps
None
8 bits
1 bit
None
None
Computer
Communication cable (straight)
Signal name
— NC
TXD Transmitted data
RXD Received data
— NC
GND Earth
— NC
CTS
Connected internally
RTS
— NC
Contents
ENGLISH - 137