[DISPLAY OPTION] menu
On the menu screen, select [DISPLAY OPTION] from the main menu, and select an item from the sub-menu.
Refer to "Navigating through the menu" (x page 56) for the operation of the menu screen.
fAfter selecting the item, press asqw to set.
[ON-SCREEN DISPLAY]
Set the on-screen display and position.
[INPUT GUIDE]
Set whether to display the input guide when switching the input source.
1)
Press as to select [ON-SCREEN DISPLAY].
2)
Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3)
Press as to select [INPUT GUIDE].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[DETAILED]
[OFF]
[SIMPLE]
[OSD POSITION]
Set the position of the menu screen (OSD).
1)
Press as to select [ON-SCREEN DISPLAY].
2)
Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3)
Press as to select [OSD POSITION].
4)
Press qw to switch the item.
f The items will switch each time you press the button as following:
[CENTER] → [UPPER LEFT] → [UPPER RIGHT] → [LOWER LEFT] → [LOWER RIGHT] → [CENTER] → ...
[WARNING MESSAGE]
Set the display/hide of the warning message.
1)
Press as to select [ON-SCREEN DISPLAY].
2)
Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3)
Press as to select [WARNING MESSAGE].
70 - ENGLISH
Chapter 4 Settings - [DISPLAY OPTION] menu
Displays the name of input terminal and input signal graphically.
Disables the input guide.
Displays the name of input terminal and input signal.