Gateway ADC-220 User Manual page 82

Chapter 5: Playing Media
Turning on progressive scan
If you connected the player to your TV using the Component Out jacks, you
can change the video output to Progressive Scan for superior video quality.
To turn on progressive scan:
■ While playback is stopped, press
the video settings until "Progressive Scan" appears on the screen. You need
to set this only once.
Displaying disc information on the screen
You can select the type of information to display on the TV screen during DVD
playback.
To select the information to display:
1
Press
2
Press
3
Press
number, chapter number, angle number, audio soundtrack, and subtitle
language.
4
Press
Selecting audio channels
You can select a specific audio channel from all the available audio channels.
To select an audio channel:
1
Press
2
Press
as
STEREO
78
to view information about the disc being played.
DISPLAY
once to view elapsed/remaining time.
DISPLAY
again for detailed disc information such as disc type, title
DISPLAY
again to turn off the display.
DISPLAY
during VCD playback.
AUDIO
repeatedly to select the audio channel you want to hear, such
AUDIO
, , and
LEFT RIGHT
www.gateway.com
repeatedly to cycle through
VIDEO OUT
.