Wireless Access Point Setup - Gateway ADC-220 User Manual

Chapter 2: Setting Up Your Player
3
Use your remote control's arrow buttons to highlight
ENTER
automatically connects to the wired Ethernet network. If multiple
networks are available, highlight the
again to select the correct network from the network list.
The IP address appears in the lower-right corner of the screen. To change
the way the IP address is selected, see
To change the player name (as it appears to other players), see
the player name" on page
4
Highlight
5
Press
6
Go to
player's other settings.

Wireless access point setup

To configure the player for a wireless access point network:
1
Make sure that your computer is on and Media Server is running.
The Media Server icon
is running.
If the Media Server icon has a red "x" on it, Media Server is running but
cannot connect to the network. See
page
22
. The message "Loading network settings" appears, and the player
, then press
OK
or to close the Setup menu.
SETUP RETURN
"Customizing" on page 35
81.
www.gateway.com
Network
"Setting the IP address" on page
28.
. Network setup is complete.
ENTER
for instructions on customizing your
in the Windows taskbar shows that the program
"Network troubleshooting" on
, then press
Network
setting, then press
ENTER
"Changing
27.