Turning On Your Player - Gateway ADC-220 User Manual

Turning on your player

To turn on your player:
1
Make sure that your computer is on and running Media Server, your home
network is set up, and all audio and video devices are turned on.
2
Connect the player's power cord to a wall outlet, then press the
button on the front of the player. The Power LED turns yellow.
3
Turn on your TV, then use its controls to set it to the audio/video input
type connected to the player.
4
Turn on your audio system (if using an external amplifier or audio system),
then use its controls to set it to the input type connected to the player.
5
Press
VIDEO OUT
connection. See the table below for combinations of video settings and
connections that also work. The rows on the left name the type of cable
connection your player and TV use, and the columns across the top name
the video setting you can select by pressing the VIDEO OUT button.
Audio jacks
Composite jack
S-Video jack
Interlaced
component jacks
Progressive
component jacks
repeatedly until the setting matches your video
Composite S-Video
setting setting
Best
Works Best
Works
www.gateway.com
Connecting the player
Interlaced Progressive
Component Component
setting setting
Works
Best
Best
POWER
19