Gateway ADC-220 User Manual page 77

3
Press
OPEN/CLOSE
is scratched, dirty, or if the DVD is not encoded for Region 1, the disc will
not play.
4
If the disc does not automatically begin playing, press
remote control or on the front of the player.
Warning Always press STOP
turning off the player.
5
Press the following remote control buttons for other playback features:
Button Function
PAUSE/STEP
Press to freeze at the current frame during playback.
Press again to advance one frame at a time. Press
PLAY
PREV/NEXT
Press to skip to the previous or next chapter or track.
REV/FWD
Press repeatedly to scan backward or forward at variable
speeds during playback.
SLOW
Press repeatedly to play in slow motion at variable
speeds.
STOP
Press to stop playback, then press PLAY
playback. Press STOP twice to stop playback and start
over at the main menu.
to close the disc tray. The disc begins playing. If the disc
to stop playback of a disc before
to resume normal playback.
www.gateway.com
Playing discs
on the
PLAY
to resume
73