Wireless Access Point Setup - Gateway Connected DVD Player User Manual

Wireless access point setup

To configure the player for a wireless access point network:
1
Make sure that your computer is on and Media Server is running. The Media Server
icon in the Windows taskbar shows that the program is running.
If the Media Server icon has a red "x" on it, Media Server is running but cannot
connect to the network. See
2
On the player's remote control, press
screen opens on the TV.
3
Use your remote control's arrow buttons to highlight
4
Highlight
Find Your Network
of available networks opens. Names of networks using wireless access points end with
"ACC PT."
5
Highlight one of the detected networks, then press
network please wait" appears, then the message "Successfully joined [network name]"
appears.
6
Press
ENTER
The IP address appears in the lower-right corner of the screen. To change the way the
IP address is selected, see
To change the player name (as it appears to other players), see
name" on page
7
Highlight
8
Highlight
Key Format
ASCII characters
"Network troubleshooting" on page
, then press
to continue. The main Network menu opens.
"Setting the IP address" on page
43.
, then press
View WEP Settings
, then press the
, or .
Disabled
www.gateway.com
, then press
STOP SETUP
Network
to search for an available network. A list
ENTER
. The message "Joining new
ENTER
.
ENTER
buttons to select either
83.
. The Welcome to Setup
, then press
ENTER
42.
"Changing the player
Passphrase, Hex digits
.
,
37